Please read my Terms (TOU) before doing the tutorial.
Thank you for putting a link to this tutorial by showing your realization on a website, forum or in an email!
With your result, you can make signatures, websets, incredimail letters, etc.
Please, credit to Tati Designs, thank you.
Materials
PSPX9 (you can use any version).
To do this tutorial you will need a main tube.
Download the tutorial material here:
Filters:
&<Bkg Designer sf10 I> / Cruncher (download here).**
&<Background Designers IV> / <Lightburst...> (download here).**
ºvºKiwi's Oelfilter / 3.5 Promille (download here).
AP [Lines] / Lines - Silverlining (download here).
Mehdi / Weaver (download here).
Alien Skin Eye Candy 5: Impact (download here).
Simple / Top Left Mirror (download here).
** Import this filter with "Unlimited".
IMPORTANT
It is forbidden to modify or rename files or remove the watermark.
Please do not use the material provided outside this tutorial.
Main tube by Isa, you can download here.
The rest of the material used in the tutorial is mine.
Preparation
Duplicate the tubes. Close the originals.
Install the Filters in the "Plugins" folder of your PSP.
Colors
Choose colors in harmony with your tube.
This is the tutorial palette:
If you use other colors, you must play with the Blend Mode and the Opacity of the layers.
≈ Step 1 ≈
In your Materials palette:
Set your Foregroundcolor to (1) #9e2017 
Set your Backgroundcolor to (3) #ffcf4f 
≈ Step 2 ≈
Set your Foregroundcolor to "Foreground/Background" Gradient:
≈ Step 3 ≈
Open the file "TD_Canal_Alfa_Be_Original.pspimage". Duplicate and close the original.
(This will be the base of our work, which contains selections on the alpha channel.)
Rename the layer "Canal Alfa" as "Raster 1", "Trama 1", etc, depending on the language of your PSP.
≈ Step 4 ≈
Fill your transparent image with the foreground gradient.
≈ Step 5 ≈
Effects / Plugins / Unlimited / &<Bkg Designer sf10 I> / Cruncher;
≈ Step 6 ≈
Effects / Plugins / Unlimited / &<Bkg Designer sf10 I> / Cruncher:
≈ Step 7 ≈
Layers / Duplicate.
≈ Step 8 ≈
Close the visibility of this layer and go to the one below ("Raster 1").
≈ Step 9 ≈
Effects / Plugins / Unlimited / &<Background Designers IV> / <Lightburst...>:
≈ Step 10 ≈
Effects / Image Effects / Seamless Tiling:
≈ Step 11 ≈
Adjust / Sharpness / Sharpen.
≈ Step 12 ≈
Open the visibility of the layer "Copy of Raster 1" and position yourself on it.
≈ Step 13 ≈
Effects / Plugins / ºvºKiwi's Oelfilter / 3.5 Promille (default):
≈ Step 14 ≈
Effects / Geometric Effects / Skew:
≈ Step 15 ≈
Effects / Distortion Effects / Pixelate:
≈ Step 16 ≈
Effects / Edge Effects / Enhance.
≈ Step 17 ≈
Effects / Distortion Effects / Pinch: Strength 100%
≈ Step 18 ≈
Effects / Image Effects / Seamless Tiling:
≈ Step 19 ≈
Effects / 3D Effects / Drop Shadow: 0 / 0 / 60 / 20 / Color: (1) #9e2017
≈ Step 20 ≈
Effects / Plugins / Mehdi / Weaver:
≈ Step 21 ≈
Adjust / Sharpness / Sharpen.
≈ Step 22 ≈
Set your Foregroundcolor to (5) #932b97 
Set your Backgroundcolor to (6) #2da6d7 
≈ Step 23 ≈
Layers / New Raster Layer and fill with the following gradient:
≈ Step 24 ≈
Effects / Texture Effects / Weave:
≈ Step 25 ≈
Effects / Edge Effects / Enhance.
≈ Step 26 ≈
Activate "Selection" Tool (S) and click on "Custom Selection":
≈ Step 27 ≈
Selections / Modify / Feather: Feather amount: 50
≈ Step 28 ≈
Selections / Invert.
≈ Step 29 ≈
Press the "Delete" key on your keyboard.
≈ Step 30 ≈
Selections / Select None.
≈ Step 31 ≈
Effects / Image Effects / Seamless Tiling:
≈ Step 32 ≈
Lower the Opacity to 50.
≈ Step 33 ≈
Image / Mirror
≈ Step 34 ≈
Effects / 3D Effects / Drop Shadow: 0 / 0 / 60 / 20 / White 
≈ Step 35 ≈
Layers / New Raster Layer and fill with the color (4) #fbecc5 
≈ Step 36 ≈
Open the mask "TD_Mask1_Be_Original"and return to your work.
≈ Step 37 ≈
Layers / New Mask Layer / Fron Image:
Layers / Merge / Merge Group.
≈ Step 38 ≈
Effects / 3D Effects / Drop Shadow: 0 / 0 / 60 / 20 / Color: (1) #9e2017
≈ Step 39 ≈
Selections / Load/Save selecction /Load Selection from Alpha Channel.
You will see that the selection is directly available "TD_BeOriginal_Sel1", click to "Load":
≈ Step 40 ≈
Layers / New Raster Layer and fill the selection with the color (2) #ff964d 
≈ Step 41 ≈
Selections / Select None.
≈ Step 42 ≈
Selections / Load/Save selecction /Load Selection from Alpha Channel.
Show the menu and choose "TD_BeOriginal_Sel2", click to "Load":
≈ Step 43 ≈
Effects / Plugins / AP [Lines] / Lines - Silverlining:
≈ Step 44 ≈
Selections / Select None.
≈ Step 45 ≈
Lower the Opacity to 50.
≈ Step 46 ≈
Effects / 3D Effects / Drop Shadow: 0 / 0 / 60 / 20 / Color: (1) #9e2017
≈ Step 47 ≈
Open the tube "TD_Deco1_Be_Original"and copy.
Return to your work and paste as new layer.
≈ Step 48 ≈
Activate Tool "Pick" (K) and modify the positions of X (9,00) and Y (35,00):
Press the "M" key to deactivate the "Pick" Tool.
≈ Step 49 ≈
Set your Foregroundcolor to (1) #9e2017
Set your Backgroundcolor to (2) #ff964d
≈ Step 50 ≈
Selections / Load/Save selecction /Load Selection from Alpha Channel.
Show the menu and choose "TD_BeOriginal_Sel3", click to "Load":
≈ Step 51 ≈
Layers / New Raster Layer and fill with the following gradient:
≈ Step 52 ≈
Effects / Artistic Effects / Enamel:
≈ Step 53 ≈
Effects / Edge Effects / Enhance.
≈ Step 54 ≈
Effects / Plugins / Eye Candy5: Impact / Glass and,
on "Settings",
select "Clear":
≈ Step 55 ≈
Selections / Select None.
≈ Step 56 ≈
Selections / Load/Save selecction /Load Selection from Alpha Channel.
Show the menu and choose "TD_BeOriginal_Sel6", click to "Load":
≈ Step 57 ≈
Fill the selection with the same gradient.
≈ Step 58 ≈
Effects / Artistic Effects / Enamel (like before).
≈ Step 59 ≈
Effects / Edge Effects / Enhance.
≈ Step 60 ≈
Effects / Plugins / Eye Candy5: Impact / Glass and,
on "Settings",
select "Clear".
≈ Step 61 ≈
Selections / Select None.
≈ Step 62 ≈
Set your Foregroundcolor to (5) #932b97
Set your Backgroundcolor to (6) #2da6d7
≈ Step 63 ≈
Selections / Load/Save selecction /Load Selection from Alpha Channel.
Show the menu and choose "TD_BeOriginal_Sel4", click to "Load":
≈ Step 64 ≈
Layers / New Raster Layer and fill with the following gradient:
≈ Step 65 ≈
Effects / Plugins / Eye Candy5: Impact / Glass and,
on "Settings",
select "Clear".
≈ Step 66 ≈
Selections / Select None.
≈ Step 67 ≈
Selections / Load/Save selecction /Load Selection from Alpha Channel.
Show the menu and choose "TD_BeOriginal_Sel5", click to "Load":
≈ Step 68 ≈
Fill the selection with the same gradient.
≈ Step 69 ≈
Effects / Plugins / Eye Candy5: Impact / Glass and,
on "Settings",
select "Clear".
≈ Step 70 ≈
Selections / Select None.
≈ Step 71 ≈
Open the tube "TD_Deco2_Be_Original" and copy.
Return to your work and paste as new layer.
No need move.
≈ Step 72 ≈
Open the tube "TD_Texto_Be_Original" and copy.
Return to your work and paste as new layer.
≈ Step 73 ≈
Activate Tool "Pick" (K) and modify the positions of X (32,00) and Y (19,00):
Press the "M" key to deactivate the "Pick" Tool.
≈ Step 74 ≈
Effects / 3D Effects / Drop Shadow: 0 / 0 / 45 / 10 / Color: (1) #9e2017
≈ Step 75 ≈
Open the tube "TD_Titulo_Be_Original" and copy.
Return to your work and paste as new layer.
≈ Step 76 ≈
Activate Tool "Pick" (K) and modify the positions of X (610,00) and Y (447,00):
Press the "M" key to deactivate the "Pick" Tool.
≈ Step 77 ≈
Effects / 3D Effects / Drop Shadow: 0 / 0 / 45 / 10 / Color: (1) #9e2017
≈ Step 78 ≈
Layers / New Raster Layer and fill with the color (4) #fbecc5
≈ Step 79 ≈
Open the mask "TD_Mask2_Be_Original"and return to your work.
≈ Step 80 ≈
Layers / New Mask Layer / Fron Image:
Layers / Merge / Merge Group.
≈ Step 81 ≈
Change the Blend Mode to "Soft Light" and lower the Opacity to 80.
≈ Step 82 ≈
Image / Add Borders / Symmetric - 1 pixel / Color: (1) #9e2017
Image / Add Borders / Symmetric - 1 pixel / Color: (2) #ff964d
Image / Add Borders / Symmetric - 1 pixel / Color: (1) #9e2017
Image / Add Borders / Symmetric - 15 pixels / Color: #ffffff
Image / Add Borders / Symmetric - 1 pixel / Color: (1) #9e2017
Image / Add Borders / Symmetric - 5 pixels / Color: (2) #ff964d
Image / Add Borders / Symmetric - 1 pixel / Color: (1) #9e2017
Image / Add Borders / Symmetric - 43 pixels / Color: #ffffff
≈ Step 83 ≈
Open the tube "TD_Deco3_Be_Original"and copy.
Return to your work and paste as new layer.
≈ Step 84 ≈
Activate Tool "Pick" (K) and modify the positions of X (19,00) and Y (19,00):
Press the "M" key to deactivate the "Pick" Tool.
≈ Step 85 ≈
Effects / Plugins / Simple / Top Left Mirror.
≈ Step 86 ≈
Open the main tube of your choice again and copy.
Return to your work and paste as new layer.
Resize if necessary. Place in the center.
If you use the same tube as me:
Activate Tool "Pick" (K) and modify the positions of X (325,00) and Y (17,00):
Press the "M" key to deactivate the "Pick" Tool.
≈ Paso 87 ≈
Effects / 3D Effects / Drop Shadow: 0 / 10 / 40 / 20 / Black 
≈ Paso 88 ≈
Layers / New Raster Layer and add your name or watermark.
≈ Paso 89 ≈
Image / Add Borders / Symmetric - 1 pixel / Color: (1) #9e2017
≈ Paso 90 ≈
Image / Resize: Width 950 pixels (Resize All Layers" - Checked).
≈ Paso 91 ≈
Adjust / Sharpness / Sharpen.
≈ Paso 92 ≈
Export your work as an optimized .jpg file.
It's over!
I hope you liked it and enjoyed it.
.:. Another version of the tutorial with a tube by Animabelle .:.
.:. If you want to send me your work with the result of this tutorial, contact me .:.
.:. Here you can see other versions of the tutorial .:.
